Signal Conditioners
Bridge type signal conditioners
Strain gages, or other bridge transducers may be connected directly to the rear panel. Module supports quarter, half, and full bridge circuits with either voltage or current excitation, and input voltage ranges from 1 mV to 50 volts. Signal conditioning includes filters, bridge completion circuits, amplifier/bridge balancing, and shunt calibration. Data can be converted to user units and readout directly from the software in units such as Strain.
ICP® type signal conditioners
Accelerometers, force transducers and microphones can be input directly into the ICP type accelerometer module. Featuring up to 4 mA, 24V bias and AC coupling, the module provides excitation to these piezoelectric devices. Data can be converted to user units and readout directly from the software in units such as g’s.
ICP® is a registered
trademark of PCB Piezoelectronic, Depew, NY, USA
Products
| Applications | Support
| Contact Us | News
| Privacy | Home
© 2005 Hi-Techniques, Inc.
meDAQ/Win600e Hi-Points
Hardware
- Mainframes
- Acquisition Cards
- Signal
Conditioning - Timebase
/Triggering - Transient Memory
- Streaming
- Filtering
Software
Options
Downloads
