Synergy Input Modules
A Range of Input Modules To Support Most Applications
Mix and match input modules for even greater flexibility. Up to 4 modules can be installed in the Synergy portable or Qb, 8 modules in the Synergy 8 and 16 modules in the Synergy Rack system.
Basic Input Module offers up to 2 MS/s acquisition speeds and direct to disk recording at 200 kS/s. High impedance, differential front end supports voltage range from 20 mV to 20 V and direct connection to most oscilloscope probes and connection devices via BNC inputs.
Universal Signal Conditioning Module supports most signal types and can be configured differently for every channel offering the ultimate in capability. No more purchasing and storage of additional modules, no more expensive surprises.
- DC Bridge: Connect your strain gages, load cells, force, pressure, torque and piezo-resistive sensors with support for ¼, ½ and full bridge. Autobalance, Shunt Cal and Auto Cal functions are provided at a touch.
- Thermocouple: Direct inputs for your thermocouples, with cold junction compensation and real-time linearization.
- ICP® type accel: Constant-current excitation for your accelerometers, microphones and force transducers. Charge-mode sensors are also supported with small in-line charge converters.
- Voltage inputs: Great versatility with wide input spans from 20 mV to 20 V direct, up to 40 KV with scope probes. All channels are differential to prevent ground loop and EMI problems.
- Sensor power: DC Excitation sources of 1 to 10V provide flexibility to power bridges, MEMS sensors, DC-LVDT’s, transmitters, current loops and other circuitry.
Optional Signal Conditioning Breakout Interface simplifies wiring, enables ability to add external bridge completions resistors as well as providing cold junction compensation and blade type thermocouple connectors.
High Voltage Input Module offers up to ± 1000 V input range and 2000 V peak ch-ch isolation for high voltage and high power applications. Wide input range from ±50 mV allow direct simultaneous connection to high voltage signals and current shunts via the 4mm safety banana jack connectors.
Medium Voltage Input Module provides a cost effective isolation solution for general purpose voltage applications offering ±50 mV to ± 200 V range on isolated BNC Connectors.
High Density 16-Channel Input Module provides 16-bit, 100 kS/s independent ADCs with full differential inputs and thermocouple support via a high density 78-pin connector. Combine multiple modules for up to 64 channels in a portable chassis or 256 channels in the larger Synergy CS chassis.
High Speed Input Module provides four channels of 100 MS/s per channel, 16-bit digitizing or two channels of 200 MS/s digitizing using a proprietary interleaving technique. Differential, high impedance, 25 MHz amplifiers support voltage from +50 mV to +20 V full scale.
|
For more information about these Input Modules, our Spec Sheets are available on the Tech Notes page.
|
|
